DATA COMMUNICATION

Search This Blog

Presentation Video

on January 01, 2021

Get link
Facebook
X
Pinterest
Email
Other Apps

Presentation Video

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

TCP/IP

In this section, we are assumed that we have correctly identified the IP address for the ULearn System Server. Therefore, we must produce a manual on how to configure the IP address on the server, and can use any operating system to demonstrate this task. The explanation should be supported with the screenshot and appropriate explanation. Answer: TCP/IP manual setting on windows 10 IP address: 192.168.8.2 Step 1 Open Control Panel then choose Network and Internet . After that choose Network and Sharing Center Step 2 On the connections , the Wi-Fi will appear and click on the Wi-Fi . Step 3 Then choose Properties Step 3 Double clicking on the "Internet Protocol Version 4 (TCP/IPv4)" then click OK. Step 4 Change from "Obtain an IP address automatically" to "Use the following IP address" Insert an IP address of ULearn System Server. IP address and default gateway should be same because its in the same range except for the last numbe...

Subnetting

In this section, we are expected to show the calculation on how to identify the IP address that was assigned for the ULearn System Server based on the information given in the project scenario and explain the concept and show the calculation to identify the IP address. Answer: For subnetting for the IP address, we decided to assign to IPv4 class C . Private network is chosen as to not interfering with other networks and suitable for security purpose. So we decided to assign this addressing 192.168.0.0/16. As we assume that there are 25 departments in UTeM and all departments have the same amount of computers, we need to create enough subnet. So we take the magic number which is higher than 25, which is 32 . Then, the netmask for subnet will be /21 And since each department will get their own subnet assigned. According to the scenario, we will assign a subnet to the ICT Center and give the ULearn...

Project Scenario

This scenario of this project is referring to Figure 1. Figure 1 shows the logical network flow from a home network to UTeM facilities. In this figure, a UTeM’s lecture is trying to access the ULearn system located in the UTeM network facilities. The lecturer is using his modem to connect to the public network before able to connect to the UTeM facilities. From the UTeM network, the data then was forwarded to IT Center where the ULearn System server is located.

Powered by Blogger

Presentation Video

Presentation Video

Comments

Post a Comment